One of my model projects is Russ Woods' super modified. The photo below shows Russ Wood at speed taken by Jim Feeney ISMA series photographer.  The model is 1/12th scale about 12 inches long. Build time about 6 months (in my spare time). The frame is 1/8 in. brass tubing. Each piece cut, bent then soldered together. My plans were sketched out mostly by using photos from the web.This photo, is the finished model. There are a few plastic parts including the engine block and heads, seat and the rear end . Mostly every other part I made on my mini lathe. The car has disk brakes, braided fuel lines, coil over shocks, gauges, front and rear brake cylinders and dry sump oil pump and tank.